Phone: (503)659-7401 / FAX: (503)659-7385
    Navigation: Home > Full Retube™ Kits for Mesa > Mesa Roadster and Trem-O-verb Amps.
Products:
Tee Shirts and Stickers!
Tube Girl Coffee Mugs
Special Orders Confirmed By Email
Bias Probes and Multimeters
Weber Speakers
Tube Damper Rings
Preamp Tubes
Power Tubes
Rectifier Tubes
Electrolytic Caps
Full Retube™ Kits for Mesa
Full Retube™ Kits For Fender
Full Retube™ Kits for Peavey
Full Retube™ Kits For Marshall
Full Retube™ Kits For Traynor
Full Retube™ Kits for Carvin
Full Retube™ Kits for Crate
Full Retube™ Kits for Krank
Full Retube™ Kits for the B52 Amps
Full Retube™ Kits for Laney Amps
Full Retube™ kits for VOX amps.
Full Retube™ kits for Orange amps.
Full Retube™ kits for Kustom Coupe Amps.
Full Retube™ kits for Dr Z Amps.
Full Retube™ kits for Bugera Amps.
Full Retube™ kits for Engl Amps.
Full Retube™ kits for Budda Amps.
Full Retube™ Kits for Rivera Amps.
Full Retube™ kits for Bogner Amps.
Full Retube™ kits for Egnater Amps.
Full Retube™ kits for Jet City Amps.
Full Retube™ kits for Ampeg Bass amps.
Full Retube™ kits for SUNN & Fender Bass amps.
Full Retube™ kits for Mesa Boogie Bass amps.
 
Search:
 

 

Mesa Roadster and Trem-O-verb Amps.  
Description: Full retube kits for the Mesa Roadster and Trem-O-verb amps including different output, preamp and rectifier tube options. These are just a few of the most popular configurations. Please note that the combo versions of both these amps cannot use the KT88 and KT66 kits unless you change the Bear Trap style tube retainers which pinch the tube base. You need to install the Spring and Cap style retianers to use the KT88's and KT66's becsue the tubes are upside down. We usually have these in stock but you need to check by phone.

Mesa Roadster & Trem-O-verb Standard retube kit with 6L6GC's
Price: $145.00 
Description: If you simply want your amp to sound warmer and less fuzzy with better note definition then this kit will do it. A matched quad of the JJ 6L6GC's for a very fat and full sound along with 6 JJ ECC83S's one of them being balanced for the phase inverter in V6.
< Back

Mesa Roadster & Trem-O-verb High Gain Option with 6L6GC's
Price: $160.00 
Description: Need all the gain you can get from your Roadster or Trem-O-verb? This kit uses a matched quad of the JJ 6L6GC's for power, three hand picked high gain ECC83S's for V1, V2 and V3, two standard ECC83S's for V4 and V5 along with a balanced ECC83S for the phase inverter in V6. Scorching lead tones and better note definition!
< Back

Mesa Roadster & Trem-O-verb Gold Pin Option with 6L6GC's
Price: $186.50 
Description: If you're looking for the smoothest tone possible without a gritty edge, like a Carlos or Eric Johnson sound then this kit will move you in the right direction. This kit uses a matched quad of the JJ 6L6GC's for power, three gold pin ECC83S's for V1, V2 and V3, two standard ECC83S's for V4 and V5 along with a balanced gold pin ECC83S for the phase inverter in V6. SMOOTH & RICH!
< Back

Mesa Roadster & Trem-O-verb Standard retube kit with E34L's
Price: $131.00 
Description: Looking for a British flavor that is nice and punchy? This kit uses a matched quad of the JJ E34L's for a very tight and punchy sound along with 6 JJ ECC83S's one of them being balanced for the phase inverter in V6. Very tight with big open mids.
< Back

Mesa Roadster & Trem-O-verb High Gain Option with E34L's
Price: $146.00 
Description: Need all the gain you can get from your Roadster or Trem-O-verb but you want that tight pushed mid the E34L's offer? This kit uses a matched quad of the JJ E34L's for power, three hand picked high gain ECC83S's for V1, V2 and V3, two standard ECC83S's for V4 and V5 along with a balanced ECC83S for the phase inverter in V6. Get a little Marshall on your Mesa!
< Back

Mesa Roadster & Trem-O-verb Gold Pin Option with E34L's
Price: $172.50 
Description: If you want that smooth Carlos or Eric Johnson sound along with the tight British E34L tone then here you go! This kit uses a matched quad of the JJ E34L's for power, three gold pin ECC83S's for V1, V2 and V3, two standard ECC83S's for V4 and V5 along with a balanced gold pin ECC83S for the phase inverter in V6.
< Back

Mesa Roadster & Trem-O-verb Standard retube kit with KT77's
Price: $147.00 
Description: If you want to get more of the EL34 type mid range but you want to retain more of the low end then this kit may be for you. It uses a matched quad of the JJ KT77's which have almost as much low end as 6L6's. The KT77's have even a bit more low end extension than the E34L's and they have a nice sizzle in the top end that is not brittle, along with a very harmonically complex mid. For the front end this kit uses 6 JJ ECC83S's one of them being balanced for the phase inverter in V6.
< Back

Mesa Roadster & Trem-O-verb High Gain Option with KT77's
Price: $162.00 
Description: Need maximum gain and the unique sound of the KT77's? This kit uses a matched quad of the JJ KT77's for power, three hand picked high gain ECC83S's for V1, V2 and V3, two standard ECC83S's for V4 and V5 along with a balanced ECC83S for the phase inverter in V6.
< Back

Mesa Roadster & Trem-O-verb Gold Pin Option with KT77's
Price: $188.50 
Description: Want that smooth Carlos or Eric Johnson sound along with the KT77 sound? This kit uses a matched quad of the JJ KT77's for power, three gold pin ECC83S's for V1, V2 and V3, two standard ECC83S's for V4 and V5 along with a balanced gold pin ECC83S for the phase inverter in V6. Smooth and very harmonically complex!
< Back

Mesa Roadster & Trem-O-verb Personal Fave with KT77's & 6V6's
Price: $203.50 
Description: And now for something completely different. This is a variation on the -Personal Fave- kit that many of our Dual Rec customers have been enjoying over the past few years. This kit includes two GZ34 rectifier tubes, a matched pair of KT77's and a matched pair of 6V6's for power. We start the front end out with a long plate gold pin ECC803S for V1 followed by a gold pin ECC83S for V2 and a hand picked high gain ECC83S in V3. Then we use two standard ECC83S's in V4 and V5 followed by a balanced ECC83S in V6 for the phase inverter. These get a killer clean and a smooth rich tone with plenty of distortion and the warmest tone I've heard yet from a DR. These need to be run in the tube rectifier mode and EL34 bias setting. You can run in the Bold or Spongy mode. This setup is especially cool in the Roadster where you can assign lower power settings to use either the 6V6's in the outside sockets or the KT77's in the outside sockets.
< Back

Mesa Roadster & Trem-O-verb Integrated Quad with KT88's and KT66's
Price: $221.00 
Description: This is a kit we put together for drop tuned Metal players who want a "kill on contact" low end but who have out grown the scooped mid thing and need a good cutting solo voice. This Retube kit includes an Integrated quad with two KT88's to handel the thunder and punch and a pair of the KT66's to give you a great open mid and high end that cuts and crunches up at higher volumes. For the front end five standard ECC83S's for a rich warm tone and a balanced ECC83S for the phase inverter in V6. These are used in the 6L6 mode and can be run in the Bold or Spongy mode in solid state or tube rec mode with the stock 5U4's or better yet the GZ34's. These are plug and play with no bias mods.
< Back

Mesa Roadster & Trem-O-verb Integrated Quad High Gain Option with KT88's and KT66's
Price: $236.00 
Description: Need maximum gain with the thunder and cut of the Integrated KT88 - KT66 combination? Here you go! This Retube kit includes an Integrated quad with two KT88's to handel the thunder and punch and a pair of the KT66's to give you a great open mid and high end that cuts and crunches up at higher volumes. For the front end 3 hand picked high gain ECC83S's for V1, V2 & V3, two standard ECC83S's for V4 and V5 and balanced PI tube for V6 will get you GAIN THUNDER and CUT! These are used in the 6L6 mode and can be run in the Bold or Spongy mode in solid state or tube rec mode with the stock 5U4's or better yet the GZ34's. These are plug and play with no bias mods.
< Back

Mesa Roadster & Trem-O-verb Standard Front End
Price: $69.00 
Description: This is a standard front end kit consisting of five standard ECC83S's and one balanced ECC83S for the phase inverter in V6.
< Back

Mesa Roadster & Trem-O-verb High Gain Front End
Price: $84.00 
Description: This is a high gain front end kit consisting of three hand picked high gain ECC83S's for V1, V2 and V3, two standard ECC83S's for V4 and V5 along with a balanced ECC83S for the phase inverter in V6.
< Back

Mesa Roadster & Trem-O-verb Gold Pin Front End
Price: $110.50 
Description: This is the gold pin front end kit consisting of three gold pin ECC83S's for V1, V2 and V3, two standard ECC83S's for V4 and V5 along with a balanced gold pin ECC83S for the phase inverter in V6.
< Back

Mesa Roadster & Trem-O-verb Personal Fave Front End
Price: $99.50 
Description: We start the front end out with a long plate gold pin ECC803S for V1 followed by a gold pin ECC83S for V2 and a hand picked high gain ECC83S in V3. Then we use two standard ECC83S's in V4 and V5 followed by a balanced ECC83S in V6 for the phase inverter.
< Back

Mesa Roadster & Trem-O-verb Personal Fave Power Section
Price: $104.00 
Description: This is the power section kit for the Personal Fave consisting of two GZ34 rectifier tubes, a matched pair of KT77's and a matched pair of 6V6's in the proper grade to run in these amps. The 6V6's can be run in either the outside two sockets or the inside two sockets which is nice for you Roadster owners for getting different sounds when assinging channels. These need to be run in the tube rectifier mode and EL34 bias setting. You can run in the Bold or Spongy mode.
< Back

Mesa Roadster & Trem-O-verb KT88-KT66 Power Section
Price: $152.00 
Description: This is the power section kit consisting of a matched pair of KT88's and a matched pair of KT66's in the proper grade to run in these amps. The KT66's can be run in either the outside two sockets or the inside two sockets which is nice for you Roadster owners for getting different sounds when assinging channels. These need to be run in the 6L6 bias setting. You can run in the Bold or Spongy mode with either the 5U4's or the GZ34's or in the solid state diode mode. We out this up so you can mix and match the power tubes with the different front end kits.
< Back

Cart:

Your cart is currently empty.

   
My Eurotubes:
Login to My Account
Register a New Account